INLIGHT Plug-in LED Puck Lights Kit with Dimmer, 3000K, 3 or 6 Pack | IN-0102

Purchased 14 puck lights. Stripped all the wiring, connected them in parallel, and connected to a PWM dimmer and 60w 12v power supply. Also purchased on Amazon. At max brightness, 14 lights use about 30 watts and at minimum brightness (can get really dim with PWM) <1 watt and that's all 14 not each.

Under a closet shelf, where shadows ruled the space, there is light and brightness now.This kit is easy to install, and quite versatile. The on/off/dimmer, distribution harness, and long wires provide plenty of options for any difficult lighting job.This was the right choice for my “wine closet” conversion project.Glasses hanging under the shelf are now back lit and sparkling.

Works great, looks good.

We are happy with these! Our new to us home came with no under cabinet lighting. The kitchen is 4th on the reno list, so actual wiring behind new backsplash and dedicated switch lighting isn't happening until then.Our old home had significant investment into undercabinet lighting during its remodel, so we are picky. These do the trick and we are content with them - which honestly says a lot.With that, we did find we have to put one set of 6 on one side, and another on the other side. Like I said, they'll do the trick well, until the reno.

These lights are not the best quality, but considering the cost, you get what you pay for. The switch did not work and had to be replaced; customer service was prompt and efficient. We ended up returning the product, because it did not suit our needs. The cost of wire extensions is very high.

Easy to set up. Dimmer works well. Great light. Perfect to light my model case from placing on top of acrylic case pointing down and illuminating the model.

I put these under a shelf above my work desk and it creates great lighting for work and zoom calls! I love the dimmer control, I threaded it under my desk so I can reach it sitting down. Easy to install, these are great for my use! I didn’t want to get ones that were rechargeable and these are great, no running out of battery or having to replug them in just hit the on switch and voila!

Exactly as expected! Easy to install. Only compliant is they need longer cords, and the extension cords are just as expensive as the light assemblies themselves.

These lights really work well and have significant intensity. The quality is really good and installation with the wiring provided makes it easy to use.

Excellent lights, bright, easy to install, nice long cords on everything, except.The cords on the switch/dimmer are rather short being only about 6 inches long. Everything else is plenty long enough, not sure why they went so short on the switch. I wanted the switch on the front of the cabinet not the back. I have the skills, tools and materials I needed to extend the wires... I lacked the ambition.I would buy these lights again, and likely will. They show off my knick-knacks much better than the LED strips I original put in the cabinet.

This work very well. I put them on a timer in a cabinet so it lights up at night automatically. I also bought them again to go under my overhead on my desk and they provide just the right amount of light.

We have a hutch/entertainment center that we bought from a large, national chain. One of the LED puck lights failed. They still sell them, actually, but I had no success in getting a replacement from the manufacturer of the furniture nor the manufacturer of the light itself. So, Plan B was to purchase these puck lights.According to the specs (I didn't measure), each light has 55" of power cord. Given the span between the two "towers" in my entertainment center, that would mean I need to install the included power distribution block and dimmer mid-span. That's what I did. The kit comes with a small piece of 3M VHB (very high bond) double-sided tape that I used to mount the block (though it's probably intended for the dimmer).Speaking of the dimmer, the button doesn't stay attached to it. I don't care because I'm not using it anyway, primarily because I can't reach it. Why? Because as other reviews have mentioned the cord on it is very short. It needs to be placed close to the distribution block, which you're going to want to hide, so you need to mount the dimmer and on/off switch in what is probably the least convenient place possible. I'm using a smart switch at the outlet to control the lights, so I'm kind of okay with that.I surface-mounted the lights. They are low profile and even when surface mounted look fine. You can also recess them, and there's a template included if you want to do that.

Installed smartly and easily. Of better quality and appearance than one expects for puck lights. Really happy with them lighting up nick nacks in out curio cabinet.

10/10! 5 stars ⭐️⭐️⭐️⭐️⭐️

Overall great product..good for under the counter for decent lighting, good for cabinets with glass for displaying

As advertised, easy to install

Great replacement for lights above sink. Easy to install and bright lights for kitchen area.

Lights for my custom shelves I am building. Look great and are easy to install. I love the included hardware. Perfect for cable management.

I held off writing a review as I was having an issue with these lights and a 1.5 second delay from when I flick the switch to when the lights illuminate.I have two lights setup on one outlet that I control with the light switch in our kitchen. There is no other way for me to utilize these lights without using the provided 6-port hub. The problem is, this hub is the cause of the delay. I went to the previous reviews and found someone who had the exact same setup and exact same issue. They contact support and were able to somehow resolve things.So before this review, I emailed their support, and they basically said I should just order the single puck lights individually, which are much more expensive per light. Is there really no other solution? I'd love to know how the other reviewer was able to resolve this delay.

Worked great until it just stopped working. Only lasted about 8 months. LED lights should last a very long time.Stay away from these led lights.UPDATE: Contacted the seller and they sent me a new converter (thing that the lights plug into) and it works now. There is a big delay when I switch it on… takes about two seconds for the lights to come on after I hit the switch. But it’s fine. Adjusting from 1 to 3 stars (due to the fact that they tried to make it right and the fact that it’s now laggy.)

The lights are easy to install and have a good light… not too white or yellow. We enjoy them on at night.

Les lumières ont été installées sous mes armoires de cuisine. Il éclaire bien mais pas très fort (2w peut être normal) et plus jaune que je pensais mais ça me convient. Cependant, il manquait une pièces de montage (voir photo) lors de l’ouverture de la boîte….mise à jour: le vendeur m’a contacté pour régler le problème et m’a finalement envoyé un nouveau kit de lumière en peu de temps !! Vendeur de grande qualité !!

I put these in a china cabinet to replace the old light with the piano bulb. It is much better and and be dimmed if desired. very nice lights.

Bought these for hardwired application. The colors of the light is like an operating room, not warm. Hardwired doesn’t work.

Easy to install, great app. If you're looking for a good light choice, these work well

Looks good. Good length cords. Nice dimmable switch. Exactly what I was looking for.

I found these easy to install and hide away. Love the dimmable light levels as I like a low subtle light effect in my cabinets.

We needed something to replace lights under our cabinets. These are so sleek. They’re less than half the size of what we previously had. They were also very easy to install. Would buy again!

Bought for an over the sink light in the laundry room. Wired it up to a motion sensor and it's perfect. Provides plenty of bright light for washing things in the corner laundry tub.

Easy to replace old puck lights with these, although the wire length of individual light can be too short. This set is good if you have a small area/cabinet to install, and don't mind walk up to the lights to dim it. This is not ideal for custom installation. I have about 10' cabinet to install these lights (replacing old halogen puck lights, had the transformer in the middle, lights at either end didn't have long wires. I had to splice additional wires for both end lights to have enough length. But worst of all, I used a Lutron Caseta lamp dimmer, thinking I can use the pico remote to dim these lights, but that didn't work. When they say it's dimmable, it's dimmable with the supplied transformer/dimmer, not with a wall dimmer or lamp dimmer, very misleading. I ended up spending another $20 to get a dimmable transformer and threw their transformer with dimmer away.